No-dig trenchless plumbing is a technique used in many situations where there are issues with the plumbing system. This method is used when you either cannot or if you want to avoid digging so that you can fix the issue that someone has. Here, we will explain how this technique works and why it is beneficial.
Why would someone use this method?
The goal of this method is to cause as little damage to the surface area as possible. This can be done because someone lives in an area where there are a lot of people, like in the city center, and where it is better not to destroy the streets and other things so that you can get to the pipes. Also, some people simply call someone to do their underground water line repair so that they do not destroy their garden or things like that. This method is harder than just using an excavator and digging a hole so that the plumbers can look at the problem directly but it offers significant benefits to the property owner so it is often utilized.
Pipe bursting
The most common problem that plumbers have to face when it comes to underground plumbing systems is that a pipe bursts. This is a severe issue because the burst causes the water to be contaminated and there is a risk of flooding and other problems that require repair as soon as possible. What the experts do in this case, since they are not able to dig and replace the damaged parts, is pull through the old burst pipe and replace it with a new one. The head of the new pipe will completely destroy the old one and it will take its place completely.
Pipe relining
Maybe you have seen this method in action on some social media sites because it has become somewhat viral in the last few months because of the interesting way the procedure is done. The plumbers put a flexible liner saturated with resin through the old pipes. What it does is stick to the inner layer of the pipe and cover all the cracks the old pipe has had. When the resin hardens, it effectively creates a pipe within a pipe and you won’t have any more problems with the cracks.
Directional drilling
In this method, the experts drill a hole in the ground where the old pipe was. They take out the old pipe in its entirety and then replace it with a new one. Since they are digging under roads and other important infrastructure, they need to be extra careful when it comes to the diameter of the hole that they are drilling since they do not want the earth to collapse. If that does happen, it could even injure someone who is on the surface.
Slip lining
Here, a smaller pipe is inserted into the old one and it replaces it. What they usually do is fill in the area between the old and new pipes with some material so that the new one is secure.
Living in a populated area
Sometimes, people can’t bring an excavator and drill to find pipelines so that they can fix them. Either because it is too expensive to fix all the damage that has been done to public property or simply because the city does not allow it. That is why people are forced to go through their homes and find suitable solutions to the problem. It would be much easier just to dig the pipes out and replace them but sometimes that is not possible.
Maintaining your surroundings
There are many people out there who treasure their gardens and what they have done with their landscape, and they would not like anything to disturb its beauty. That is why they hire a plumber who knows some no-dig methods to fix if there is a fracture or some other problem with their pipeline. The pipes get fixed while no damage is done to their beautiful garden.
Cost-effectiveness
Depending on the work at hand, using these methods can be cheaper than some traditional methods. When fixing pipes that are under the surface, you will most likely have to call in an excavation crew, which is not cheap. Also, a lot of equipment and labor needs to be paid for if you want to get the job done. By using these methods, you will have to pay a smaller team of people to do the work.
The noise
Nobody likes noise and some people cannot stand it either because of their health or simply because they were built that way. When you resort to traditional ways to deal with this problem, you will most likely have to use heavy machinery, which makes a lot of noise. By utilizing no-dig methods, you have made the best decision to lower the volume of everything. Also, some areas in the city do not allow a lot of noise to be made, so if you want to avoid complaints from your neighbors and the authorities yourself, it may be better that you resort to some different techniques to deal with the problem.
Less time spent
If you want the job done as soon as possible, and if you want to get the workers out of your home, then by resorting to these techniques, you may have made a decision that will bring you closer to that. Excavation can take a lot of time; the experts will have to dig everything up, fix the pipes, and then restore what they have done, which can take a lot of time.
It is environmentally friendly
If you are someone who cares about the world they live in, maybe it will be important for you to take care of the soil that surrounds your house. By using this method, you will do as little damage as possible to the ecosystems around your house, which is always a great thing.
There are many benefits of using these alternative methods to deal with certain plumbing issues. You need to see the bigger picture of what method will benefit you the most and do the least amount of damage.
Recent Comments