Brick pavers are common for both residential and commercial use. Its original purpose is to keep people from slipping, which is especially important during the rainy season. It has a rough and textured surface, making it slip-resistant, which is why it is commonly used on poolsides and other wet areas to provide safety and prevent accidents.
Brick paving is a common practice in Australia. It provides a lot of advantages to its users. Its material is known for being solid and durable. It also offers environmental and aesthetic benefits, in addition to its slip-resistant surface. However, some Australians are uncertain about how to clean them. The most common brick stains and how to remove them are listed below.
Cleaning paint stains on brick pavers depends on how dry or wet it is. It would help if you also find out whether or not the paint is water-based. Most fresh paints are removed with the use of a rag or towel. To avoid spreading, remember to blot it and avoid wiping.
However, soaking the surface in hot water and scrubbing it until it is not changing anymore will help remove water-based paint stains. After that, you must wait for the leftover paint to dry before using paint remover and thinner as your last resort.
Tire Skid Marks
The practice of brick paver cleaning in Perth is essential because of the prevalent use of this pavement in their community. Cars can even use the brick pavers as roadways in some areas. Unfortunately, this practice causes tire skid markings on the brick pavers, which take time to clean.
You’ll need a brush, detergent, water, and scouring powder to remove tire skid marks off brick pavers. First, scrub the black spot with a solution of water and detergent. Then, you can use scouring powder in the solution to remove any remaining marks. When you’re having trouble cleaning this type of stain, replacing the pavers is usually recommended.
Oil or Grease
Oil and grease are common stains for car guys who like to fix their cars and engines outside their houses. Spillage of oil and grease might stain the brick pavement. Usually, these are hard to clean because the brick pavers absorb this substance quickly. However, there is a way to clean this stain completely.
The first thing to do is wipe the oil away immediately. Covering the area with cat litter removes any remaining oil or grease that the paver has absorbed. Cleaning this stain with products like Talc or Diatomaceous earth is also a good idea. You’ll leave it on the stain for 24 hours before sweeping it away.
Spilling food condiments on your brick pavers is hard to avoid, especially when you like having outdoor gatherings like barbecue or cookout parties. The good thing is there is a way to clean it. First, you have to put detergent directly and leave it there for about 20-30 minutes. After that, scrubbing it and applying hot water will help remove the stain.
Leaf or Wood Stains
Brick pavements are typically observed in parks, where plants and trees surround them. It’s possible that if leaves or branches fall on the pavement, they’ll stain it. In addition, it causes the surface to be slippery, especially during the wet season. This stain removes the brick pavement’s original purpose.
However, using a bleach solution can quickly remove the stain. You have to soak and then scrub the stain marks with a stiff bristles brush afterward. This trick might help in eliminating this unwanted stain.
Caulk and Chewing Gums
Caulk or sealant, as well as chewing gums, have a sticky texture. Construction works or careless gum flinging could have caused these stains. Some people may find it difficult to remove these off brick pavements.
However, scraping off the excess materials and then pouring denatured alcohol over might help. Rinsing it with hot water while scrubbing the pavers afterward will surely help you clean the stain thoroughly.
Asphalt can also stain your brick pavers, which you don’t want. It is commonly used in road construction projects that are near brick pavements. Among the other stain markings, it is one of the most difficult to remove.
Removing this might take time because it becomes solid hard when it is thoroughly dried out. So, the first thing you’ll do is cool the surface by applying ice, especially when the sun is out. The next thing to do is to apply scouring powder while scraping it off. Lastly, you could rinse the surface with water. This method might help in eliminating this stubborn stain.
Brick pavers are good investments, especially in avoiding unfortunate slipping accidents. However, maintaining it can be challenging if you don’t know how to remove various stains. Different stains each need different solutions to clean them. The tips and techniques mentioned above should help you sustain the utility and aesthetic of your brick pavements.