When it comes to the plumbing in your home, you will want to make sure that you handle some of the major issues as early on as possible. This can help make sure that a small fix is done, rather than having to spend a ton of money handling it later when it turns into a big mess. There are a number of different plumbing issues that you may encounter as time goes on, and some of the most common include:
Broken Pipes
No homeowner wants to deal with broken pipes when it comes to their plumbing. This can lead to a big mess with flooding and you may have to go without water to the home until the issue gets fixed. Depending on how serious the issue is, you may need to replace a good deal of the piping throughout the home, which is never a fun experience. There are a number of different issues that you can encounter that would lead to broken pipes and some of the most common include:
# The pipes have cracks or some kind of broken seal on them
# There is damage to the pipe joint
# There is rust in the pipe to worry about
# There is incorrect pipe laying to consider
# There are some stubborn clogs that you didn’t take care of.
If you do have a pipe that is getting older and you are concerned about how to handle the damage before it breaks, then it is time to call in a plumbing professional to get the work done. They will be able to answer your questions and give you some of the best solutions to handle it all.
Leaky Faucets
Another plumbing issue that you may need to worry about is a leaky faucet. These may not seem like a big deal, but they can be expensive, inconvenient, and wasteful if you do not take good care of them along the way. These drips can sometimes be a simple fix, such as an O ring or a washer that is a little bit worn out. You can just replace these parts and the leak will go away. However, other times the damage is due to incorrect faucet installation or corrosion, and you will need to do some more work to get it fixed.
When the faucet does start to drip, you will need to first check out how much that drip is costing you. There are some drip calculators that you can go with that help. You can then call in a plumber to take a look at the faucet so they can tell you the problem and get it fixed.
High Water Pressure
You should not have high water pressure going into your home. While this doesn’t mean that you need to sacrifice and have no water pressure, if the pressure inside of your home is high, this is a major plumbing issue and you need to look at getting it fixed as soon as possible. This can cause a lot of damage to the piping and is not a problem that will fix itself; it is one that will make the whole situation worse.
Running Toilets
It is common to have some issues with your toilets on occasion. This is such a common plumbing issue that you may be able to fix some of the work on your own. But if you notice that your toilet is running all the time and doesn’t seem to stop, then this is a sign of a big problem. In fact, ignoring this could make you lose up to 200 gallons a day, which is going to get expensive and will add up fast.
There are a number of things that can cause the toilet to start running and you should check out each one to see what it is for you. Some common causes here include:
# The refill tube is having some issues
# You have a broken flapper seal or the flush valves are not working
# The flapper chains are not properly fitted to the toilet you have.
A Sink That Drains Slowly
While there are other problems that can show up with your toilet, we can also take a look at the sink and see if this is a potential spot for some trouble. You may have a sink that decides it does not want to drain well. This is an issue of a blockage in the sink or the pipes that will limit the flow of water and can make it seem like the water is taking forever. Since this is in your kitchen, it is possible that some clotted fat or other food leftovers are the main culprit and you will need to get that cleaned. If we are talking about the bathroom, then knotted hair and soap will be to blame.
The best thing that you can do here is to clear everything up. You can start by using a plunger to see if that will loosen things up. Using a mixture of baking soda and vinegar can help out quite a bit. Occasionally a chemical clog cleaner is effective, but be careful about using these because they can cause damage to the piping. And a plumber’s snake will be helpful. If none of these work, call in the professional to come take a look. Leaving the clog is just going to make the situation worse and puts a lot of strain on the whole system.
When you are worried about some of the plumbing around your home, then it is time to work with the professionals who will be able to get it done right the first time. Our team is one of the best Mount Pleasant plumbers who will be able to come out right away and give you the best results possible with all of your plumbing needs. Whether you are looking for help with a
clogged drain or it is time to redo all of the piping in the home, we are confident that our team can come and get it done. Contact us today to learn more.
Recent Comments