4 Ways Of Installing A Pipe Lining System In Your Home
Typically, extreme water pressure and old age can cause damage to your sewer pipes. Without proper inspection and home maintenance procedures, your pipes could eventually collapse, causing a lot of trouble to your entire plumbing system and your home. However, did you know that there might be contractors who can help you fix your major plumbing issue without replacing pipe and digging up your yard?
Ideally, there’s an innovative solution that inserts a “sleeve” into your existing but leaking or broken pipes that feed water to your home. This article explains how it works. If you’re interested in learning more about this, search for a plumbing professional in your area who is familiar with this technique.
For now, below are the things you need to learn about pipe lining system and how you can install one in your home.
What Is A Pipe Lining System?
A pipe lining system refers to a system wherein a no-dig solution is required to repair or replace broken, cracked, and leaking pipes. It’s essentially putting a pipe within a pipe, which is why it doesn’t involve costly excavation and demolition. Compared to replacing the entire pipes, pipe lining is cost-efficient and, more importantly, increases the life span of a piping system, leading to little to no destruction to the property.
There are many reasons why you should consider installing a pipe lining system. If your house is more than ten years old, the damage to your pipes is already present.
Below are the signs that warrant the installation of a pipe lining system:
- The water coming from the pipes has some discoloration.
- There are continuous sewage backups.
- There are stains on the sinks or tubs.
- There are water leaks and foul odors around the pipes.
- There’s poor water flow.
How Can You Install A Pipe Lining System?
Now that you know what a pipe lining system is, it’s time to tackle the step-by-step process of installing one in your home. Below are the four ways of installing a pipe lining system in your home:
- Prepare The Existing Pipes
Before the installation proper, the first thing you should do is prepare the existing pipes to ensure the best results. To get started, you need a good-quality video camera to inspect the pipes’ condition from within. Once the camera is set up, you can now start cleaning and measuring the pipes’ diameter and length. If you notice some damage that can affect the installation process, make sure to stop the infiltration of water and that the pipes are ready for the lining procedure.
- Insert The PVC-Coated Liner Tube Through The Small Open Entries
After the preparation, the next step is the installation process. Under this stage, you’ll have to use the PVC-coated liner tube for the lining. You insert the liner tube through the small open entries and make sure everything is installed correctly without partially damaged sections.
However, you should keep in mind that liner tubes come in different angles, bends, and transitions. Thus, check your pipes’ condition first and determine what type of liner tube fits your piping. For example, if you have existing straight pipes, use standard liner tubes to get the job done right. Using a wrong liner tube can affect the success of the lining process.
- Apply Epoxy
Once you have inserted the PVC-coated liner tube through the small openings, apply epoxy to create a tight fit between the liner and the pipe wall. Remember, the application of epoxy can stop water from escaping or entering the pipelines. This means that your lining system can protect your pipes from erosion or corrosion and penetration of roots inside the lined pipe, among many others.
- Wait For The Curing Process
Before you can finally use the pipes, you should wait for at least four to 12 hours for the curing process. This means that the liner tube, with the help of the epoxy, should bond to the pipe wall before you return the service of the pipes.
Final Takeaway
Indeed, major pipe repairs or replacements are expensive in labor. Not only that, but they also take some time. Luckily, with the installation of a pipe lining system, operations of your pipes don’t have to be disrupted for a long time. It can also enhance the physical condition of your plumbing processes.
Therefore, if you consider having this system in your home, keep these ways in mind to ensure accurate installation. For professional assistance, hire a good plumber to assist you.
Recent Comments