$link = str_replace('content/', '', $_SERVER['REQUEST_URI']); $linkstring = str_replace(' ','',$link );

It’s important to have the heating system in good condition before the weather turns chilly. Here, we’ll discuss the problems your system can face and their solutions.


Nothing can be worse than waking up in the middle of a deadly winter night only to find the room freezing cold because you have no heat. And yes, even sunshine states can and also get cold when winter is at the peak. The worst winter doesn’t hit states like Florida normally. Still, temperatures can dip, and you’ll want to be in comfort at your home. Being a resident of the northern part of the United States, your heating system might not have to be used six months a year, but when the winter approaches, you’ll want it to run efficiently and work in top-notch condition.


This is why it’s vital to have the heating system at your place in good working condition and serviced before the winter starts. Here, we’ll discuss a few problems which occur most commonly with your heating system and the appropriate ways to approach and fix these issues.


Lack of Regular Maintenance:

If you want to keep your heating system in tip-top working condition, you’ll need to hire an expert, licensed (where licensing is required) service contractor and get regular, scheduled maintenance done. Regular maintenance, if done properly by a certified and expert service contractor can avoid most of the common furnace-related problems. You’ll surely want to protect the investment of thousands of dollars you have made in your home heating system. Otherwise, lots of issues can happen. Energy requirements will increase and so does the cost. Costly unexpected breakdowns will happen. Your heating system will show poor performance, making you frustrated if you don’t perform regular maintenance.


Run HVAC Troubleshooting to have peace of mind and protect your investment in your home and office heating system by a certified technician.


Heating System at Your Place Won’t Turn Off:

You need to check and make sure whether your heating system is set on ‘auto’ mode rather than ‘on’ mode when it continues to blow hot air while running. After reaching its set temperature, the heating system will automatically go off if it is put on auto mode. Systems vary on how the run on peak performance.  If you are not sure, call in the pros to help you learn the ins and outs of your system.


But if it doesn’t stop there, your thermostat may be wired in an incorrect way, or it can be broken. There is also a probability of an issue with the blower of your heating system. So, first, you need to make sure that the thermostat wiring is plugged in the correct way and then observe how the system runs after resetting it to the manufacturer’s settings. Your thermostat will have to be replaced if this doesn’t work.


But if the problem lies in the blower of your heating system, you should call a heating repair specialist to identify and fix the problem.


Heating is Not Done Properly in Some Areas of Your House:

Another common problem seen in the home heating system is not providing a uniform temperature throughout your home. Reasons can be several. It may be because of the air filter being dirty or the ductwork having some issues. Issues with the heating system’s fan motor, belts, or bearings can also be the reason behind the problem.


If it is a matter of replacing the air filter, you can do it by yourself as it’s an easy fix. But when the problem is with your ductwork or system, you have to contact a heating repair specialist.


Your Heating System Stay Lit or Won’t Light:

Newer Heaters are now using an intermittent pilot light instead of the traditional pilot light, and they operate using electronic ignition. If needed, the sensors have to be replaced or cleaned, which ensures that when the heater is off, the gas doesn’t flow.


The fan of The Heating System Isn’t Working:

At first, you need to check the thermostat whether it is in an incorrect setting when the fan of your heating system isn’t working properly. Next, you have to inspect the cleanliness of the air filter to ensure that it’s not dirty; in some cases, the fan stops working due to an overly dirty air filter.


Finally, make sure your circuit breakers are switched on, but it can cause an electrical fire if you repeatedly switch them on and off. If you still don’t get a positive result applying these methods, contact a professional heating system technician.


Controls of Thermostat Aren’t Working:

If an issue arises while changing the system controls or setting the temperature, again, the issue can be associated with your thermostat. Apply the troubleshooting methods mentioned earlier in this post. If your thermostat is a digital one, then you might have to replace the batteries. After trying all the solution tips, if nothing comes with a positive result, your last try would be resetting it to the manufacturer’s setting.


If the problem still doesn’t get solved, inspect carefully if there is a tripped circuit that can be responsible. You can inspect the wiring one last time, but an expert HVAC professional will be best able to find out the problem.


A Burning Smell Coming from The Heating System:

After turning on the heater for the first time after a while during the winter, you may smell something burning as your heating system is going to burn accumulated dirt and dust since the last time it has been used.


The smell can also come if your air filter is dirty; however, it might indicate a more serious problem. Unplug your heating system and shut it off as soon as possible if the smell still persists. After unplugging it, clean it properly if there is accumulated dust, and change the air filter if needed.

Contact a heating repair specialist if the problem is still not solved.


Energy Bills Are Rising High:

Most Floridians use heat pumps instead of furnaces, and a few minor issues like a tripped breaker or a dirty filter can also increase the energy bills during the winter season.


That said, the problem can turn out to be more serious, as in a refrigerant leak or a damaged compressor. If the problem cannot be addressed by troubleshooting the former issues, you should hire an experienced heating repair professional.