Regular maintenance is critical in maintaining the robot and the overall performance of your pool system. Cleaning the pool filter may sound like a simple, but necessary, task that you should already be doing. Whether you have a pool robot, pool vacuum robot, or a manual vacuum for pool, a clear filter is necessary for a clear pool!
In this step-by-step guide, we’ve provided some of the most effective methods, must-have tools, and the ways keeping your filter clean can improve the overall efficiency of your pool cleaning robot, skimmer, as well as other cleaning apparatus.
What do Pool Filters Do in Robotic Pool Cleaners
A cleaner pool filter ensures better performance of the swimming pool robot cleaner and keeps it working effectively, capturing fine debris including algae. “Will a Pool Robot pick up algae?” If you’re already making that kind of investment, see why it pays to spend a little more. —the answer is yes, especially if the system isn’t gummed up with dirt or buildup.
Step 1: Shut Off Your Pool System
However, before any maintenance, you may want to turn off your pool pump and robot pool unit. If you’re running a pressure-side cleaner, it can mean turning off your pool booster pump too.
Step 2 – Destroy the Air and Open the Filter Housing
Release any pressure in the tank by opening the air valve. Open the filter housing carefully this is more important with cartridge or DE (diatomaceous earth) filters. Your beatbot AquaSense 2 Ultra, BeatBot AquaSense 2 Pro, or BeatBot AquaSense 2 will appreciate it when you give it a Flush so it operates more smoothly after the rinse cycle.
Step 3: Take Out and Check the Filter
Remove the cartridges or grids and look for signs of wear, cracks, or algae. Algae can plug your filter and reduce the effectiveness of your pool vacuum for algae removal or wall climbing pool cleaner.
Step 4: Rinse With Garden Hose or Filter Cleaner
Rinse dirt and debris with a garden hose plus a high-pressure nozzle or a filter-cleaning wand. Spray between every pleat or grid meticulously. For heavy buildup, apply a commercial filter cleaner or soak overnight in a weak solution of muriatic acid (always check product labels and safety instructions).
Step 5: Reconstruct the System and Reboot
Once thoroughly rinsed and dried, replace the cleaned filter, screw the housing back in, and start your system. After your system is running again, look for leaks and pressure changes.
If you’re a pool owner who’s asked how to acid wash a pool or how to drain an inground pool without a pump, it’s better to seek expert advice to prevent damage.
The Importance of Clean Filters in Robotic and Manual Pool Cleaners
What will clean the filters do Clean filters have the following benefits:
Beneath that, trap resistance is lowered on robot pool cleaner models
Maytronics pool cleaner and Beatbot models, allowing them to sieve more of the fiddle-faddle along the way
In-ground pool Manual systems such as skimmers and suction pool vacuums
Skipping this task would overwhelm your machines and diminish their cleaning abilities, and you would end up spending more money on your water and electricity bills.
Pro Tips for Peak Performance
Filters should be cleaned every 4–6 weeks during the peak season
Backwash sand & DE filters if pressure increases 8-10 PSI above starting level
After the use of chemical cleaners always rinse well.
Check filter pressure and monitor on a regular bases
The Takeaways: How to Keep Your Robotic Pool Cleaner Running at Full Capacity
As important it is to use a quality robot pool cleaner, make sure you take care of your filter! This article should provide some “in-the-know” defense tips so you can keep your pool filter longer whether you depend on the pool vacuum, the robotic pool cleaner, or the Beatbot AquaSense 2 saving you money, and better energy use, and cleaner water!
By doing these steps and keeping your system clean, you’re giving your pool cleaning robot the opportunity to do what it does the best provide you with crystal clear results with much less work on your part.
Recent Comments